2. Repairs

Steering Key Lock

Read More
Untitled photo
5 / 5

  • OAKES STEERING LOCK. When trying to salvage my steering lock I had to grind off the peg that moves the on/off indicator. I was confused how the mechanism was held together, so I cut an old cylinder rotor down the middle to see how the spring loaded plunger was held in place. There is a key that holds the locking plunger in place. I drilled out the old broken pin and tapped it to 4mm and I will screw a 4 mm thread in place and secure it with thread locker. I chose 4 mm mainly because it was the nearest size thread that I had and it will require thinning down to fit in the slot on the back of the on/off indicator. I do recall being challenged by it all at the time so these pictures may help explain how it all comes apart. The key was not visible on my rotor until I cut the other one up. (Vaughn Gunthorpe May 2013)
  • OAKES STEERING LOCK. When trying to salvage my steering lock I had to grind off the peg that moves the on/off indicator. I was confused how the mechanism was held together, so I cut an old cylinder rotor down the middle to see how the spring loaded plunger was held in place. There is a key that holds the locking plunger in place. I drilled out the old broken pin and tapped it to 4mm and I will screw a 4 mm thread in place and secure it with thread locker. I chose 4 mm mainly because it was the nearest size thread that I had and it will require thinning down to fit in the slot on the back of the on/off indicator. I do recall being challenged by it all at the time so these pictures may help explain how it all comes apart. The key was not visible on my rotor until I cut the other one up. (Vaughn Gunthorpe May 2013)
  • Untitled photo
  • Untitled photo
  • Untitled photo
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.